新闻资讯

当前位置:首页 / 新闻资讯 /

怎么避免印刷出现缺页的情况?

  贴纸印刷书籍主要由热熔胶绑定,使用不干胶胶顺序告诉热熔胶,热溶胶一般控制热熔胶的温度在160度,和只有在适当的操作温度,热熔胶生产最强大的附着力,只有在最佳的温度将胶水涂在书中,书封面坚定地坚持,因此精确的温度控制胶锅是实现热熔胶最佳粘接的关键。目前有一种冷胶,可根据情况直接使用或适当加水使用。冷胶的特点是附着力强,使用方便,但干燥速度慢。以热熔胶为例,分析其在使用过程中容易引起的纸张质量问题。

  Sticker printed books are mainly bound by hot melt adhesive, using self-adhesive sequence to tell hot melt adhesive, hot sol generally controls the temperature of hot melt adhesive at 160 degrees, and only at the appropriate operating temperature, hot melt adhesive produces the strongest adhesion, only at the optimum temperature will glue in the book, book cover firmly adheres to, so accurate temperature control. Adhesive pot is the key to realize the best bonding of hot melt adhesives. At present, there is a kind of cold glue, which can be used directly or properly with water according to the situation. Cold glue is characterized by strong adhesion, easy to use, but slow drying speed. Taking hot melt adhesives as an example, the paper quality problems easily caused by hot melt adhesives in use were analyzed.

  为了防止胶印刷书籍的外观的页面,打开胶现象,但也需要改变传统的印前组装方法,传统的四倍到三倍,此外还注意气候和环境因素的影响不能忽略。同样在页面匹配的过程中,如果页面后的书帖没有直接完成进入下一个流程,那么很容易掉出页面的质量,所以书帖进入下一个流程,一定要完成。所谓整理,就是把书的半成品扎好,压实,并装订好,压实后的书背上涂上一层粘合剂,使书背牢固牢固,等书背上的粘合剂干燥后,再将书背单独安排好,进入下一道工序。书籍用书页装订后的整理工作是整个不干胶装订过程中非常重要的一步。产生掉页问题的原因有很多,所以结合实际操作情况进行分析,杜绝掉页现象,使产品达到卓越。

QQ截图20170929174648.jpg

  In order to prevent the appearance pages of offset books and open the glue phenomenon, but also need to change the traditional pre-press assembly method, the traditional four to three times, in addition to paying attention to the impact of climate and environmental factors can not be ignored. Similarly, in the process of page matching, if the posts after the page are not directly completed into the next process, then it is easy to fall out of the quality of the page, so the posts into the next process must be completed. The so-called finishing is to tie up, compact and bind the semi-finished products of the book. After the compaction, the back of the book is coated with a layer of adhesive, so that the back of the book is firm and firm. After the adhesive on the back of the book is dried, the back of the book is arranged separately to enter the next process. The sorting of books after binding with pages is a very important step in the whole process of non-adhesive binding. There are many reasons for the problem of page dropping, so combining with the actual operation situation, we can eliminate the phenomenon of page dropping and make the product excellent.

  胶水有两种,黄色的胶水和白色的胶水看什么样子的书拿什么胶水,有的客户更喜欢白色的胶水,感觉透明度上更漂亮,其实只要质量控制的效果是一样的。

  There are two kinds of glue, yellow glue and white glue. Some customers prefer white glue. They feel more beautiful in transparency. In fact, as long as the effect of quality control is the same.

  印后装订加工的质量关系到一本书的整体效果,胶订一般是最后一道工序,如果最后一道工序出现问题,就会造成浪费,会造成严重的损失和公司的声誉。

  The quality of post-press binding process is related to the overall effect of a book. Binding is generally the last process. If there are problems in the last process, it will cause waste, and will cause serious losses and reputation of the company.


 
QQ在线咨询
售前咨询热线
0531-87788878
售后咨询热线
15863799919