新闻资讯

当前位置:首页 / 新闻资讯 /

珠光纸印刷时掉粉的解决方法!

在日常的印刷作业中,让人头痛的事情是印刷过程出现纸张掉粉的现象;对于普通卡纸或铜版纸之类的纸张而言,若出现掉粉现象,那么肯定是纸张质量不合格所导致的,便捷的解决方法就是要求纸厂重新更换纸张。

In daily printing operations, the most headache is the phenomenon of paper powder dropping in the printing process; for papers such as ordinary cardboard or copperplate paper, if the phenomenon of powder dropping occurs, it must be caused by the unqualified paper quality, the most convenient solution is to ask the paper mill to replace the paper.

我们今天要提到的就是珠光纸这一类的特种纸,在印刷过程中出现掉粉的解决方法。大家都知道珠光纸由于其比较特殊,在印刷时容易出现掉粉及印不上色的情况,当然这并不是纸张质量不合格导致的,而是其纸张本身表面的光滑性所致。如果出现这样的情况,大家可以尝试以下方法:

Today we want to mention that pearlescent paper is a kind of special paper, in the printing process, there is a solution to powder loss. Everyone knows that pearlescent paper, because of its special characteristics, is prone to powder dropping and color printing. Of course, this is not due to the unqualified paper quality, but due to the smoothness of the surface of the paper itself. If this happens, you can try the following methods:

20190115679337.jpg

方法一:将即将印刷的珠光纸放在印刷机上空跑一次或者两次,以达到除去纸张表面粉尘的目的。

Method 1: Put the pearlescent paper to be printed over the printer once or twice to remove the dust on the paper surface.

方法二:将即将印刷的珠光纸在印刷机上过一次油,通过过油这种特殊工艺,可以将粉尘很好的吸附在纸张表面,以不至于粉尘在印刷的过程中掉下来,影响印品的质量。

Method 2: The pearlescent paper will be printed on the printing press once, through the special process of oil passing, dust can be well adsorbed on the paper surface, so as not to dust fall off in the printing process, affecting the quality of printing products.

通过上述两种方法基本上能够解决珠光纸掉粉的问题,若大家还有更好的方法,欢迎提出宝贵的意见!

Through the above two methods can basically solve the problem of pearlescent paper powder drop, if you have a better way, welcome to put forward valuable suggestions!


 
QQ在线咨询
售前咨询热线
0531-87788878
售后咨询热线
15863799919