The invention of handbags has greatly facilitated our daily life. It is lightweight and collapsible, and it doesn't occupy a lot of places. It can put a lot of small articles that are usually used for convenience, and can also be taken out when shopping.
The handbag, as the name suggests is used to carry clothing items, portable bag. It can be divided into paper handbag, non-woven cloth bag and plastic bag. The most frequently used search engines should be paper composite bags and non-woven bags. They are widely used in exhibitions, exhibitions, shopping malls, and various markets, which are highly mobile and convey information to customers better. Handbag printing is a major development direction in the printing industry. Although the process of making is very simple, there are still a lot of details to be paid attention to.
In the process of handbag printing, we should pay attention to the use of the same type of ink and do not mix different kinds of ink. If the two can not be dissolved, it will affect the quality of the handbag. In printing, to ensure the nature of the ink, to avoid direct sunlight, and to maintain the indoor temperature, preferably within 10-26 degrees Celsius. In the process of handbag printing, if ink is not regularly stirred, it will easily appear adhesion, which will affect the overall effect of the handbag. But also pay attention to not too much dilution, so that the printed product will have chromatic aberration, can be properly added to the thickener to adjust.
在印刷的过程中，也要充分的发挥出水的作用，它可有有效地控制水墨粘度，也能起到平衡ph值的作用。如果发现ph值没有 控制在8．5—9．5之间，就应该加入水或者是PH稳定剂进行调节。手提袋是一种高速的印刷，印刷的过程速度非常快，所以对油墨的干燥度也有着一定的要求，如果油墨的干燥速度过慢，可以 适当的加入干燥剂来提升它的干燥速度，如果在油墨还没干的状态下就进行印刷很容易就会出现版面花掉黏脏的情况，从而也 会影响到整体的印刷效率。
In the process of printing, it is necessary to give full play to the effect of water, it can effectively control the viscosity of the ink, and can also play a role in the balance of the pH value. If it is found that the pH value is not controlled between 8.5 and 9.5, water should be added or PH stabilizer should be adjusted. The bag is a kind of high speed printing, the printing process is very fast, so the ink drying degree also has certain requirements, if the ink drying speed is too slow, can be appropriate to add desiccant to improve the drying speed of it, if the ink is not dry under the condition of printing easily layout spend sticky dirty, it will also affect the overall efficiency of printing.
印刷完成后，应该进行设备的清洗，要在设备上的油墨，还处于粘稠状态的情况下清洗，这样才能提升清洗的速度，如果无法 用清水清洗的可以适当的加入一些清洗剂。手袋的印刷后需覆膜压型后粘盒穿绳方可成形。手袋的绳子可选用尼龙绳，棉绳或纸绳。如手袋尺寸较大时，需在绳孔 处加固铆钉以抗拉力。
After the printing is finished, the equipment should be cleaned, and the ink on the equipment should be cleaned under the condition of sticky state, so that the cleaning speed can be improved. If we can't use the clean water, we can add some cleaning agents appropriately. After the printing of the handbag, it is necessary to form the sticky box after the press of the film. The handbag rope can choose nylon rope, cotton rope or rope. If the size of the handbag is large, the rivet should be reinforced at the rope hole to resist the tension.
This article is from Ji'nan handbag, friendship and dedication, and more related knowledge, please click: http://www.sdyszb.com, we will provide you with the most advanced technology and the most sincere attitude to provide you with the most comprehensive service. We will continue to contribute to you and look forward to it.