新闻资讯

当前位置:首页 / 新闻资讯 /

挂历的排版的设计注意的要点

一。排版时请文字图片等内容放置于裁切线内5mm,

A. When typesetting, please put text, pictures and other content in the tangent line 5mm,

成品裁切后更美观。

The finished product is more beautiful after cutting.

二。文件色彩模式请设为cmyk模式。

Two. File color mode is set to CMYK mode.

三。底纹或底图颜色网点不要低于8%,

Three. Map color or shading outlets not less than 8%,

图像不低于300像素,以免印刷成品时无法呈现。

The image is not less than 300 pixels, so as not to print the finished product can not appear.

四。线条细不能低于0.076mm。

Four. The line is the smallest, not less than 0.076mm.

QQ截图20170929174712.jpg

五。coreldraw请保存为cdr格式,使用coreldraw特效图形,

Five. CorelDRAW please save as CDR format, use CorelDRAW special effects graphics,

请转换成点阵图,点阵图分辨率350dpi以上。

Please convert it to a dot matrix. The resolution of the bitmap is above 350dpi.

六。freehand、lllustrator请保存为eps格式,

Six. Freehand, lllustrator, please save as EPS format,

图片是链接的请附上原图,推荐将图片嵌入文件中。

The picture is linked. Please attach the original picture and recommend to embed the picture into the document.

七。photoshop请保存为psd格式<不要合并图层>,文件分辨率350dpi以上。

Seven. Photoshop save as PSD format < do not merge layer >, file resolution is above 350dpi.

八。pdf文件请做好出血位并拼好版可直接发片印刷。

Eight. Pdf file, please do the bleeding position and make a good version, you can directly send film printing.

九。word、excel、wps等办公软件为文字处理软件,

Nine. Word, Excel, WPS and other office software for word processing software,

并非排版设计软件,故无法直接拼版印刷。

Not the layout design software, it can not be directly printed up.

本文由济南印刷包装整理发布,您是不是对这些内容有所了解了呢?更多的内容请点击:http://www.sdyszb.com我们会有更多精彩内容等你查看

This article is printed and packaged in Ji'nan. Do you know something about it? Please click: http://www.sdyszb.com, we will have more wonderful content for you to view


 
QQ在线咨询
售前咨询热线
0531-87788878
售后咨询热线
15863799919