新闻资讯

当前位置:首页 / 新闻资讯 /

画册封面印刷的工艺种类介绍!

宣传画册对于企业来说是对企业实力考量的一种参考,也是企业重要的营销工具之一。企业对于宣传画册印刷制作有着非常高的标准和严格的要求。宣传画册精美是重中之重,尤其是宣传画册封面的设计。

  The brochure is a reference for enterprises to consider their strength, and it is also one of the important marketing tools for enterprises. Enterprises have very high standards and strict requirements for publicity album printing and production. The most important thing is the exquisite brochure, especially the design of the cover of the brochure.

  画册印刷的工艺分为很多种类,下面就给大家一一介绍。

  The process of album printing can be divided into many kinds. Here we will introduce them one by one.

  烫金/烫银

  Gold/silver stamping

  定义:热压转移印刷,简称热移印,俗称烫金、烫银。是借助于一定的压力和温度使金属箔烫印到印刷品上的方法,相对的还有个冷移印。

  Definition: hot press transfer printing, referred to as hot transfer printing, commonly known as hot stamping, silver stamping. By means of certain pressure and temperature, the foil is hot stamped onto the printed matter, and there is also a cold transfer.

  特点:有金属光泽,富丽堂皇,使印刷画面产生强烈对比。

  Features: Metallic luster, magnificent, so that the printing picture has a strong contrast.

  适用范围:适用于非常突出的文字或标识,多用于样本、贺卡、请柬、挂历、台历等。

  Scope of application: For very prominent text or logo, mostly for samples, greeting cards, invitations, calendars, desk calendars, etc.

  注意:配合起凸或压凹工艺能产生更为显著;可以采用的色彩除金银外还有彩金、雷射光、专色等可以选择。

  Note: It can produce more remarkable color with convex or concave process; besides gold and silver, there are also color gold, laser, spot color and so on.

  UV上光

  UV glazing

  UV是简称,就是靠紫外线照射才能干燥固化油墨。UV通常是丝印工艺,现在也有胶印UV。

  Ultraviolet (UV) is short for drying and curing ink by ultraviolet irradiation. Usually UV is a screen printing process, but now there are offset UV.

  定 义:将紫外线光胶满版或局部固化在印刷品表面的特殊工艺

  Definition: Special process for full or partial curing of ultraviolet photoresist on the surface of printed matter

  特 点:能够在印刷品表面呈现多种艺术特效,令印刷品更现精美

  Characteristic: It can present a variety of artistic effects on the surface of printed matter, making the printed matter more exquisite.

  种类:加厚UV、磨沙UV、七彩UV 、 玻璃珠、洒七彩粉等等

  Types: Thickened UV, Sand UV, Seven-color UV, Glass Bead, Seven-color Powder, etc.

  适用范围:书刊装裱、封套、封面、台历、高档包装、手提袋等等

  Scope of application: book mounting, envelope, cover, desk calendar, high-grade packaging, handbag, etc.

  注 意: 如果采用膜上UV,则需要采用UV专用膜,否则UV容易脱落、其泡、开胶等现象,配合起凸、烫金等特殊工艺效果更佳。

  Note: If the UV film is used, the special UV film should be used. Otherwise, the UV film is easy to fall off, foam and open glue, and the special process such as bumping and stamping is better.

  压 凹

  Indentation

  定 义:利用凹模板(阴模板)通过压力作用,将印刷品表面压印成具有凹陷感的浮雕状的图案(印刷品局部凹陷,使之有立体感,造成视觉冲击。)叫做压凹

  Definition: Using concave template (negative template) to press the surface of printed matter into relief pattern with concave feeling (local concave impression of printed matter causes stereoscopic impression and visual impact). It is called depression.

  特 点:可增加立体感

  Characteristic: Can increase stereoscopic sense

  适用范围:适用于200g以上的纸,机理感明显的高克重特种纸

  Scope of application: It is suitable for paper over 200g with obvious mechanism and special paper of high gram weight.

  注 意: 配合烫金、局部UV等工艺效果更佳,若将凹模板加热后作用于特种热熔纸将会取得非同寻常的艺术效果。

  Note: It is better to cooperate with hot stamping, local UV, etc. If the concave template is heated and acted on special hot-melt paper, it will achieve extraordinary artistic effect.

QQ截图20170929174654.jpg

  起 凸

  Convexity

  定 义:利用凸模板(阳模板)通过压力作用,将印刷品表面压印成具有立体感的浮雕状的图案(印刷品局部凸起,使之有立体感,造成视觉冲击。)叫做起凸;

  Definition: Using convex template (positive template) to press the surface of printed matter into relief pattern with three-dimensional impression (local protrusion of printed matter causes three-dimensional impression and visual impact). It's called protrusion.

  特 点:可增加立体感

  Characteristic: Can increase stereoscopic sense

  适用范围:适用于200g以上的纸,机理感明显的高克重特种纸

  Scope of application: It is suitable for paper over 200g with obvious mechanism and special paper of high gram weight.

  注 意:配合烫金、局部UV等工艺,效果更佳。

  Note: The effect is better when combined with hot stamping, local UV and other processes.

  压 纹

  Embossing

  定 义:利用雕刻纹路的金属辊加压后在纸张表面留下满版的纹路肌理

  Definition: The use of sculptured metal rolls to pressurize the paper surface to leave a full-page texture of the grain

  特 点:用普通铜板纸实现特种纹路纸的效果,装饰性强,风格独特。

  Characteristic: Use common copper board paper to achieve the effect of special pattern paper. It has strong decoration and unique style.

  种 类:梦幻石、珠玑、粗布纹、细布纹、月牙纹、金沙纹、毡纹、皮纹、梨纹、彩宣纹、条纹、金丝纹、莱妮纹、陶纹、编制纹、金叶纹、竹丝纹等,数量繁多,篇幅有限,上述为常用纹理

  Categories: Dreamstone, Pearl, Rough, Fine, Crescent, Golden Sand, Felt, Leather, Pear, Colored Xuanwen, Stripe, Golden Silk, Lenny, Pottery, Woven, Golden Leaf, Bamboo Silk, etc. Various in number and limited in length. These are commonly used textures.

  适用范围:书刊装裱、封套、封面、台历、高档包装、手提袋等等。

  Scope of application: book mounting, envelope, cover, desk calendar, high-grade packaging, handbag and so on.

  覆 膜

  Film mulching

  定 义:将塑料薄膜覆盖于印刷品表面,并采用黏合剂经加热、加压后使之粘合在一起,形成纸、塑合一的印刷品的加工技术。(在印刷品表面覆盖一层薄薄聚乙烯薄膜)

  Definition: Plastic film is covered on the surface of printed matter, and the adhesive is heated and pressurized to bond together to form the processing technology of paper and plastic integrated printed matter. (Cover the printed surface with a thin polyethylene film)

  分 类:覆膜分光膜和哑膜两种

  Classification: two kinds of film-coated spectrophotometer and dumb film

  特 点:覆光膜的产品表面亮丽、表现力强,多用于产品类印刷品;覆哑光膜的产品表面不反光,高雅,多用于形象类印刷品

  Features: The surface of the products covered with matte film is bright and expressive, which is mostly used in product printing. The surface of the products covered with matte film is not reflective and elegant, and is mostly used in image printing.

  适用范围: 200g以上的纸张,遇实色部位有折痕工艺必须使用覆膜工艺

  Scope of application: Paper over 200 g must be covered with film when there are creases in the solid part.

  注 意:128克以下纸张单面覆膜后容易因两面表面张力不同而打卷; 覆哑光膜后印刷品色彩饱和度会略有下降。

  Note: Paper under 128 G is easy to roll because of the different surface tension on both sides after one-sided coating, and the color saturation of printed matter will decrease slightly after matte coating.

  模 切

  Die cutting

  定 义:利用钢刀、钢线排列成模板,在压力作用下将印刷品加工成所要求的形状的工艺。

  Definition: The process of forming the required shape of printed matter under pressure by arranging steel knives and wires into templates.

  特 点:可产生异形,增强表现力。

  Characteristic: It can produce abnormal shape and enhance expressive force.

  适用范围:适用于以157g以上的纸为原材料的产品,如不干胶、商标、礼盒、相关印刷艺术品等。

  Scope of application: It is suitable for products with 157G or more paper as raw materials, such as non-adhesive, trademark, gift box, related printing works of art, etc.

  注 意: 尽量避免贴近扪切线的图案和线条,容易夸大扪切误差。

  Attention: Avoid the pattern and line close to the tangent line as far as possible. It is easy to exaggerate the tangent error.

  表面磨砂

  Surface grinding

  利用外力作用,在印品表面通过压轧变形而得到具有立体效果的均匀的凹凸麻砂点。这一工艺往往与烫印一起应用。

  Using external force, uniform convex and concave sand points with three-dimensional effect can be obtained on the surface of printed products by rolling deformation. This process is often used with hot stamping.

  如果您有山东印刷包装的需求可以点击我们的官网进行咨询:http://www.sdyszb.com

  If you need printing and packaging in Shandong, you can click on our official website to consult: http://www.sdyszb.com.


 
QQ在线咨询
售前咨询热线
0531-87788878
售后咨询热线
15863799919